2023New Bobovr M2 Pro Battery Head Strap For Oculus Quest 2 Elite Halo Strap With 5200Mah Battery Pack For Meta Quest2 Vr Access

BOBOVR M2 PRO Head Strap For Oculus Quest 2 Elite Halo Strap with Battery Adjustable Head Strap Increase Supporting Enhanced Playtime For Meta Quest2 VR Accessories

Features for M2 PRO Battery strap：

• BOBOVR M2 Pro is a 5200mAh battery battery head strap designed for Oculus Quest 2. Adding about 2-3 hours of battery life for Oculus Quest 2.

• magnetic detachable battery pack.Easy installation.Two battery packs can achieve unlimited battery life (the second battery needs to be purchased separately)

• Weight Balanced Design.Weight 50:50, balance the weight of the front and back.Improve wearing stability, reduce head and face pressure.

• Multi-point adjustment.More professional gear adjustment, with non-slip design, easier to grasp and operate adjustment.
  

• Upgrade the head cushion. The upgraded version of the cushion increases the contact area and is more comfortable to wear.
  

• Compatible with any headset.The BOBOVR head strap is compatible with most over-ear headphones and various in-ear headphones on the market.

• Suitable for all kinds of head shapes.The inner diameter of the headgear is 18.2-24.4inch, and with soft pads, it can be adjusted to your comfortable wearing style.
  

Parameters：
head Size:460-620mm(18.2-24.4inch)
Charging method:Magnetic removable battery pack
Input,Output:DC5V,3A MAX
Battery Type:LiBattery
Battery energy :3.7V/5200mAh,19.24wh
Rated Capacity :5V/1.5A.3200mA
0-100% charging time :About 3 hours
0-80%charging time :About 2 hours
Auto shutdown :When there is no external charging,it will automatically shut down within 40 seconds;
Safety protection:Support overcharge protection,overdischarge protection,overcurent protection,short circuit protection,high and
low temperature protection
Working temperature: 0C-40C

NOTE: M2PRO shipped from Poland, US warehouses do not come with blue silicone mat.If you mind, please choose to ship from China

• BOBOVR M2 Pro Battery Pack Head Strap Compatible with Oculus Quest 2.

• 5200mAh capacity battery

• Magnetic suction portable design

• 140g 5200mAh Magnetic battery pack.

• Type-c interface,Power Display,Magnetic connection.

• 3h working time for Oculus Quest 2.

• Two battery packs can achieve unlimited battery life (the second battery needs to be purchased separately).

• Weight Balanced Design,Multi-point adjustment.

• Improve wearing stability, reduce head and face pressure.

• More professional gear adjustment, with non-slip design, easier to grasp and operate adjustment.

• Upgrade the head cushion.

• The upgraded version of the cushion increases the contact area and is more comfortable to wear.

• The head strap is made of high-strength polymer material with extremely high toughness and robustness.

• The wrapping design can better reduce the shaking during exercise, and the rotatable shaft design makes it more convenient to wear.

• Honeycomb polymer material, which is skin-friendly and soft, reducing the feeling of stuffiness and sliding.

• Packing list:

• Head strapx1

• Battery Packx1

• Charging cablex1

• Instractionsx1

Features for BOBOVR F2 Upgrade :

• BOBOVR F2 Upgrade Active air circulation facial interface is specially designed compatible with Quest2.The micro turbo fan can quickly exhaust the hot and humid air in the mask. reducing the sultry feeling on the face and preventing the lens from fogging,making you more comfortable and flexible in vr games.

• The upgraded F2 ACF optimizes the comfort and ventilation efficiency of the face interface. Special ventilation structure design of the face interface: We added new air intake grilles at the top and bottom of the face interface, optimizing the air duct design while maintaining the same air flow, reducing the squeezing flow of internal air and avoiding dry eyes.

• Compared with the traditional face interface, the ventilation efficiency is greatly optimized, and the inside of the mask can be cycled every 2 seconds. Alleviate hot air build-up and fogging, with 2-speed wind speed adjustment, a full charge lasts 3-5 hours.

• Active ventilation fan host: Change the snap connection between the equipped mini fan host and the face interface to a magnetic connection. You can quickly remove it for charging or replacement.

• Flexible facial interface: It adopts a new flexible support technology, while ensuring its facial support, the soft face interface can better adapt to different facial contour curves and improve your wearing comfort.

Parameters：

Podue type:Acive arcreuatonfctlntertace foom

Geor:2 levels ofarvoume justoble

Charging port:Type-c,DC 5.0V±0.3V/200mA

Battery:lithium polymer battery 3.7V/300mAh

Charging time:≤2.5 hours

Ist gear battery life:Around 4.5 hours

2st gear battery life:Around 3.5 hours

Charging light:The red lightis on when charging and the red light is off when it is full

work ight:Bright white ight at work

Fan stop protection:It wll automatically shut down when the fan stop rotating.and will start automatically after 1s'

• BOBOVR F2 Active Air Circulation Facial Interface Compatible with Quest 2.

• Relieve The Accumulation of Hot Air and Lens Fogging.

• Active ventilation system: equipped with a micro turbo fan, which can quickly exhaust the air in the mask, prevent the lens from fogging, and relieve heat accumulation.

• Special ventilation structure design of the face interface: new air intake grilles at the top and bottom of the face interface, optimizing the air duct design while maintaining the same air flow, reducing the squeezing flow of internal air and avoiding dry eyes.

• 2 levels of air volume are adjustable. Quick relief from heat and lens fogging.

• In the high mode, The air in the Facial interface can circulate more than 30 times in 1 minute.

• Magnetic connection. You can quickly remove it for charging or replacement.

• Flexible facial interface: It adopts a new flexible support technology, while ensuring its facial support, the soft face interface can better adapt to different facial contour curves and improve your wearing comfort.

• PACKING LIST:

• Air Circulation Fan x1

• Flexible facial interface x1

• Anti-Leakage Nose Pad x1

• PU leather foam x1

• USB-C Cable x1

• Wipe glasses cloth x1

Features for BOBOVR C2 Carrying Case: 

• BOBOVR C2 Carrying Case compatible with official Elite headbands and various types of straps (except DAS straps).As long as the height of the headband is less than 15cm (6 inches), you can put it in.Compatible with Quest 2 Elite Strap and BOBOVR M2 Pro at the same time.

• The inside of the case is reasonably divided into multiple areas, which can accommodate the Quest2 host and controller equipped with a big head strap, and is equipped with a storage bag, which can be loaded into the data cable/charging head, etc.

• 6.5mm thick EVA material, with a pebble shape, which is resistant to fall, impact, dust and splash, and better protects your Quest2

• The C2 carrying case External dimensions ： 380mmX242mmX160mm / 15 in X9.5 inX6.3 in

Parameters：

Mode:BOBOVR C2

Material:EVA

Form Factor:Goose warm stone shape

SIZE: 380mmX242mmX160mm / 15 in X9.5 inX6.3 in

• BOBOVR C2 Carrying Case made of beautiful textured fabric materials, and uses 6.5mm thick EVA material.

• With a pebble shape, which is resistant to fall, impact, dust and splash, and better protects your beloved Quest2.

• The C2 carrying case specially designed Compatible with Quest2 and BOBOVR M2 PRO has high compatibility and large storage space.

• As long as the height of the headband is less than 15cm (6 inches), you can put it in. Compatible with official Elite headbands and various types of straps (but currently does not support DAS straps).

• The inside of the case is reasonably divided into multiple areas, which can accommodate the Quest2 host and controller equipped with a big head strap, and is equipped with a storage bag, which can be loaded into the data cable/charging head, etc.

• SIZE:380mmX242mmX160mm / 15 in X9.5 inX6.3 in

Features for BOBOVR Strap Retrofit Kit: 

• BOBOVR Strap Retrofit Kitto convert BOBOVR M2 Pro to BOBOVR M1 Pro version, (must have M2 Pro first, please do not buy this product separately if you do not have a M2 Pro strap)
  

• How to Convert M2 Pro Strap to M1 Pro Battery Pack Head Strap?
  

Step1:

Split the M2 Pro strap

Remove the screws

Force out axle cover

Break apart the connection bayonet

Step 2:

Replaced m2pro original pads with honeycomb silicone pads

Step 3:

Install M1 arm

Install the axle cover

Install the axle cover screws

Step 4:

Install the top strap & your quest2,then you can start using your quest2

• Packing list:

• Soft strap ×1

• Silicone pad 1×1

• Silicone pad2×1

• ArmL×1

• ArmR×1

• Cover ×2

• Silicone gasket x2

• Cable holder ×1

• Screwdriver ×1